Filler Compounds.

PP and PE filler compounds, made in India, for converters who want lower material cost without giving up processability.

What is it

A mineral-loaded concentrate for PP and PE

A filler compound is polypropylene or polyethylene loaded with a fine mineral (calcium carbonate, talc or barium sulphate). Added at your own line, it means part of every kilogram is mineral instead of resin.

Why it is used

Lower cost per kilogram, tuned properties

Resin is the largest cost in tape, film, fabric and moulded goods. Replacing a share of it with mineral cuts that cost, and the right mineral can also add stiffness or density where the product needs it.

Calcium Carbonate filler

Cost reduction

Calcium Carbonate

The workhorse filler. Displaces virgin resin at high loading to cut cost per kilogram in woven sacks, raffia, film, non-woven fabric and moulded articles.

Talc filler

Stiffness

Talc

Raises stiffness and heat deflection temperature over the unfilled polymer while keeping a good surface finish, for rigid parts that need dimensional stability.

Barium Sulphate filler

Density

Barium Sulphate

Adds mass where sound damping, weighting or radiation attenuation is needed rather than mechanical reinforcement.

FillerGradeLoading (%)MFI (g/10 min)Applications
Talc———Automotive interior and exterior trim (bumpers, dashboards), appliance housings, food-grade containers.
Calcium Carbonate—80–82% CaCO₃25 ± 5Woven sacks, raffia tape, non-woven fabric, blown film, injection-moulded crates and buckets.
Barium Sulphate———Sound-deadening automotive parts, radiation/X-ray shielding components, counterweights.
FillerGradeLoading (%)MFI (g/10 min)Applications
Talc———Rigid PE mouldings needing added stiffness — crates, containers.
Calcium Carbonate———Woven sacks, raffia, non-woven cloth, blown film, injection and blow moulded articles.
Barium Sulphate———Cable and wire weighting, sound dampening, radiation shielding, fishing and industrial weights.

Grade-wise specifications, loading options, TDS & SDS available on request.

Why Nexxa

Clean material, consistent lots

No reprocessed material

Our filler compounds are made without reprocessed or recycled material, so every lot starts from the same clean base.

Dedicated calcium PP line

Production capacity for the calcium PP grade is set aside for that product alone, so loading and dispersion stay consistent lot after lot.

Twin-screw, automated plant

Compounded on twin-screw extruders in a highly automated plant, which is what makes high loading with even dispersion achievable.

In-house R&D

Our R&D team tunes loading and melt flow to your line or fabric target when the standard grade is not the right fit.

Ready to discuss your requirements?

Our technical team will help you find the right compound for your application. Get in touch for samples, specifications, or a custom quote.